J - JP500KN hydraulic press roller machine

1, use:

In the secondary battery production technology, preforming process and mixing, smear (sintering) is very

Reuse of process, directly related to the electrochemical performance of the battery. Type 500 hydraulic press roller machine is designed for electricity

Pool flaking large-tonnage strong mill design. Mainly used for battery pole piece density roll, etc. using

Gas-liquid booster pump convert the low pressure of compressed air into the hydraulic oil of high pressure, so that the generation between roll

Up to 500 tonnes of nominal pressure. Suitable for lithium battery and super capacitor system of continuous and intermittent

Coating and the longitudinal space pole piece of the continuous rolling technology.

2, the performance characteristics:

1), sheet width: 50-450 mm

2), roll layout: two roll up horizontal layout. And two roller with speed driving

3), roll the line pressure: Max3000KN

4), roll gap adjustable range: 0-2 mm, digital setting adjustment accuracy of 0.001 mm. About gap between the two rollers.

5), the rolling precision: thickness deviation plus or minus 0.002 mm. After the roller (pole piece to roll former thickness deviation plus or minus 0.003 mm).

1, use:

In the secondary battery production technology, preforming process and mixing, smear (sintering) is very

Reuse of process, directly related to the electrochemical performance of the battery. Type 500 hydraulic press roller machine is designed for electricity

Pool flaking large-tonnage strong mill design. Mainly used for battery pole piece density roll, etc. using

Gas-liquid booster pump convert the low pressure of compressed air into the hydraulic oil of high pressure, so that the generation between roll

Up to 500 tonnes of nominal pressure. Suitable for lithium battery and super capacitor system of continuous and intermittent

Coating and the longitudinal space pole piece of the continuous rolling technology.

2, the performance characteristics:

1), sheet width: 50-450 mm

2), roll layout: two roll up horizontal layout. And two roller with speed driving

3), roll the line pressure: Max3000KN

4), roll gap adjustable range: 0-2 mm, digital setting adjustment accuracy of 0.001 mm. About gap between the two rollers.

5), the rolling precision: thickness deviation plus or minus 0.002 mm. After the roller (pole piece to roll former thickness deviation plus or minus 0.003 mm).

7) roll line pressure: Max3000KN is adjustable

8) don't decay hardness layer: 15 to 18 mm or higher

9) : roll hardness HRC 66 or higher

10) roll cylindricity error: + / - 0.0015 mm or less

11) installed the radial runout error: + / - 0.002 mm or less

12) adjustable clearance: 0 ~ 2 mm setting adjustment accuracy of 0.001 mm

13) roll surface roughness: Ra 0.15 or less

14) main motor power: 11 kw

15) power supply: 3 ph / 380 v / 50 hz / 18 kw

16) source: 0.9 Mpa

17) the weight: about 7000 kg

18) shape dimension: 2640 ㎜ x 1200 ㎜ x 2000 ㎜ (length + width + height)

19) machine color: cream-colored, can according to customer's specific requirements and decide)