Welcome to visit "wenzhou JinJiu packaging machinery co., LTD." the official website!
Company name: wenzhou Jin Jiu packing machinery co., LTD
Street address: zhejiang ruian feiyun Lin Si possessors industrial zone
Sales phone: 0577-66853999
After phone: 0577-66853998
Fax: 0577-66853996
Email address: j9@contributioneconomy.net
Address: en.contributioneconomy.net
1, heaven and earth cover molding machine selection smooth mesa, steadier machine, chassis feet away the machine panel can be convenient for observation.
2, insert the plug of hand-held sensing head socket on the panel and tighten. Pay attention to the positioning, gap
After 3, insert the power cord plug one end of the chassis plate on the socket, the other end of the insert the power supply socket, be sure to use single-phase three-wire system power supply.
Four, open the case on the rear panel "POWER master switch (POWER SW.)", "according to the panel POWER switch (SWITCHING) key, to be" ready "(WARM UP)" the green light is lit, the machine can work.
5, press and hold the set BUTTON (SETTING BUTTON) "key, set the right values, generally between 0.5 to 2.0 seconds.
6, put container induction head cover above, click the start button on the handle, then "HEATING (HEATING)" the red light is lit, said it was heated, the sensing head don't move, "HEATING (HEATING)" red light out and then remove the induction head, such as "ready" (WARM UP) the green light is lit or internal buzzer sound short "du" tip and then can go to the next container sealing operation.
7, heaven and earth cover molding machine check the sealing quality, according to the different material, the diameter of the container and the production efficiency, appropriate dressing "set BUTTON (SETTING BUTTON) key, and makes the sealing quality is best.
Molding machine include: paper carton packaging machinery, carton production line, automatic system box machine, automatic carton machine, box package edge equipment, paper products packaging equipment. Jin Jiu paper box forming machine adopt PLC programmable controller, photoelectric tracking system, touch screen man-machine interface, the implementation of the paper, glue, paper board molding thread, automatic positioning and laminating, casters, four corners into the box, fold the side and fold into the forming operation is completed a one-time, process automation, production efficiency compared with the traditional handmade fifty times.